Readouble

Laravel 5.7 Laravel Horizon

Introduction

Horizon provides a beautiful dashboard and code-driven configuration for your Laravel powered Redis queues. Horizon allows you to easily monitor key metrics of your queue system such as job throughput, runtime, and job failures.

All of your worker configuration is stored in a single, simple configuration file, allowing your configuration to stay in source control where your entire team can collaborate.

Installation

Note: note You should ensure that your queue driver is set to redis in your queue configuration file.

You may use Composer to install Horizon into your Laravel project:

composer require laravel/horizon

After installing Horizon, publish its assets using the horizon:install Artisan command:

php artisan horizon:install

You should also create the failed_jobs table which Laravel will use to store any failed queue jobs:

php artisan queue:failed-table

php artisan migrate

Configuration

After publishing Horizon's assets, its primary configuration file will be located at config/horizon.php. This configuration file allows you to configure your worker options and each configuration option includes a description of its purpose, so be sure to thoroughly explore this file.

Balance Options

Horizon allows you to choose from three balancing strategies: simple, auto, and false. The simple strategy, which is the configuration file's default, splits incoming jobs evenly between processes:

'balance' => 'simple',

The auto strategy adjusts the number of worker processes per queue based on the current workload of the queue. For example, if your notifications queue has 1,000 waiting jobs while your render queue is empty, Horizon will allocate more workers to your notifications queue until it is empty. When the balance option is set to false, the default Laravel behavior will be used, which processes queues in the order they are listed in your configuration.

Job Trimming

The horizon configuration file allows you to configure how long recent and failed jobs should be persisted (in minutes). By default, recent jobs are kept for one hour while failed jobs are kept for a week:

'trim' => [
    'recent' => 60,
    'failed' => 10080,
],

Dashboard Authorization

Horizon exposes a dashboard at /horizon. By default, you will only be able to access this dashboard in the local environment. Within your app/Providers/HorizonServiceProvider.php file, there is a gate method. This authorization gate controls access to Horizon in non-local environments. You are free to modify this gate as needed to restrict access to your Horizon installation:

/**
 * Register the Horizon gate.
 *
 * This gate determines who can access Horizon in non-local environments.
 *
 * @return void
 */
protected function gate()
{
    Gate::define('viewHorizon', function ($user) {
        return in_array($user->email, [
            'taylor@laravel.com',
        ]);
    });
}

Running Horizon

Once you have configured your workers in the config/horizon.php configuration file, you may start Horizon using the horizon Artisan command. This single command will start all of your configured workers:

php artisan horizon

You may pause the Horizon process and instruct it to continue processing jobs using the horizon:pause and horizon:continue Artisan commands:

php artisan horizon:pause

php artisan horizon:continue

You may gracefully terminate the master Horizon process on your machine using the horizon:terminate Artisan command. Any jobs that Horizon is currently processing will be completed and then Horizon will exit:

php artisan horizon:terminate

Deploying Horizon

If you are deploying Horizon to a live server, you should configure a process monitor to monitor the php artisan horizon command and restart it if it quits unexpectedly. When deploying fresh code to your server, you will need to instruct the master Horizon process to terminate so it can be restarted by your process monitor and receive your code changes.

Supervisor Configuration

If you are using the Supervisor process monitor to manage your horizon process, the following configuration file should suffice:

[program:horizon]
process_name=%(program_name)s
command=php /home/forge/app.com/artisan horizon
autostart=true
autorestart=true
user=forge
redirect_stderr=true
stdout_logfile=/home/forge/app.com/horizon.log

lightbulb">Tip!! If you are uncomfortable managing your own servers, consider using Laravel Forge. Forge provisions PHP 7 servers with everything you need to run modern, robust Laravel applications with Horizon.

Tags

Horizon allows you to assign “tags” to jobs, including mailables, event broadcasts, notifications, and queued event listeners. In fact, Horizon will intelligently and automatically tag most jobs depending on the Eloquent models that are attached to the job. For example, take a look at the following job:

<?php

namespace App\Jobs;

use App\Video;
use Illuminate\Bus\Queueable;
use Illuminate\Queue\SerializesModels;
use Illuminate\Queue\InteractsWithQueue;
use Illuminate\Contracts\Queue\ShouldQueue;
use Illuminate\Foundation\Bus\Dispatchable;

class RenderVideo implements ShouldQueue
{
    use Dispatchable, InteractsWithQueue, Queueable, SerializesModels;

    /**
     * The video instance.
     *
     * @var \App\Video
     */
    public $video;

    /**
     * Create a new job instance.
     *
     * @param  \App\Video  $video
     * @return void
     */
    public function __construct(Video $video)
    {
        $this->video = $video;
    }

    /**
     * Execute the job.
     *
     * @return void
     */
    public function handle()
    {
        //
    }
}

If this job is queued with an App\Video instance that has an id of 1, it will automatically receive the tag App\Video:1. This is because Horizon will examine the job's properties for any Eloquent models. If Eloquent models are found, Horizon will intelligently tag the job using the model's class name and primary key:

$video = App\Video::find(1);

App\Jobs\RenderVideo::dispatch($video);

Manually Tagging

If you would like to manually define the tags for one of your queueable objects, you may define a tags method on the class:

class RenderVideo implements ShouldQueue
{
    /**
     * Get the tags that should be assigned to the job.
     *
     * @return array
     */
    public function tags()
    {
        return ['render', 'video:'.$this->video->id];
    }
}

Notifications

Note: Before using notifications, you should add the guzzlehttp/guzzle Composer package to your project. When configuring Horizon to send SMS notifications, you should also review the prerequisites for the Nexmo notification driver.

If you would like to be notified when one of your queues has a long wait time, you may use the Horizon::routeMailNotificationsTo, Horizon::routeSlackNotificationsTo, and Horizon::routeSmsNotificationsTo methods. You may call these methods from your application's HorizonServiceProvider:

Horizon::routeMailNotificationsTo('example@example.com');
Horizon::routeSlackNotificationsTo('slack-webhook-url', '#channel');
Horizon::routeSmsNotificationsTo('15556667777');

Configuring Notification Wait Time Thresholds

You may configure how many seconds are considered a "long wait" within your config/horizon.php configuration file. The waits configuration option within this file allows you to control the long wait threshold for each connection / queue combination:

'waits' => [
    'redis:default' => 60,
],

Metrics

Horizon includes a metrics dashboard which provides information on your job and queue wait times and throughput. In order to populate this dashboard, you should configure Horizon's snapshot Artisan command to run every five minutes via your application's scheduler:

/**
 * Define the application's command schedule.
 *
 * @param  \Illuminate\Console\Scheduling\Schedule  $schedule
 * @return void
 */
protected function schedule(Schedule $schedule)
{
    $schedule->command('horizon:snapshot')->everyFiveMinutes();
}

章選択

設定

明暗テーマ
light_mode
dark_mode
brightness_auto システム設定に合わせる
テーマ選択
photo_size_select_actual デフォルト
photo_size_select_actual モノクローム(白黒)
photo_size_select_actual Solarized風
photo_size_select_actual GitHub風(青ベース)
photo_size_select_actual Viva(黄緑ベース)
photo_size_select_actual Happy(紫ベース)
photo_size_select_actual Mint(緑ベース)
コードハイライトテーマ選択

明暗テーマごとに、コードハイライトのテーマを指定できます。

テーマ配色確認
スクリーン表示幅
640px
80%
90%
100%

768px以上の幅があるときのドキュメント部分表示幅です。

インデント
無し
1rem
2rem
3rem
原文確認
原文を全行表示
原文を一行ずつ表示
使用しない

※ 段落末のEボタンへカーソルオンで原文をPopupします。

Diff表示形式
色分けのみで区別
行頭の±で区別
削除線と追記で区別

※ [tl!…]形式の挿入削除行の表示形式です。

Pagination和文
ペジネーション
ペギネーション
ページネーション
ページ付け
Scaffold和文
スカフォールド
スキャフォールド
型枠生成
本文フォント

総称名以外はCSSと同様に、"〜"でエスケープしてください。

コードフォント

総称名以外はCSSと同様に、"〜"でエスケープしてください。

保存内容リセット

localStrageに保存してある設定項目をすべて削除し、デフォルト状態へ戻します。

ヘッダー項目移動

キーボード操作