Readouble

Laravel 5.3 Facades

Introduction

Facades provide a "static" interface to classes that are available in the application's service container. Laravel ships with many facades which provide access to almost all of Laravel's features. Laravel facades serve as "static proxies" to underlying classes in the service container, providing the benefit of a terse, expressive syntax while maintaining more testability and flexibility than traditional static methods.

All of Laravel's facades are defined in the Illuminate\Support\Facades namespace. So, we can easily access a facade like so:

use Illuminate\Support\Facades\Cache;

Route::get('/cache', function () {
    return Cache::get('key');
});

Throughout the Laravel documentation, many of the examples will use facades to demonstrate various features of the framework.

When To Use Facades

Facades have many benefits. They provide a terse, memorable syntax that allows you to use Laravel's features without remembering long class names that must be injected or configured manually. Furthermore, because of their unique usage of PHP's dynamic methods, they are easy to test.

However, some care must be taken when using facades. The primary danger of facades is class scope creep. Since facades are so easy to use and do not require injection, it can be easy to let your classes continue to grow and use many facades in a single class. Using dependency injection, this potential is mitigated by the visual feedback a large constructor gives you that your class is growing too large. So, when using facades, pay special attention to the size of your class so that its scope of responsibility stays narrow.

lightbulb">Tip!! When building a third-party package that interacts with Laravel, it's better to inject Laravel contracts instead of using facades. Since packages are built outside of Laravel itself, you will not have access to Laravel's facade testing helpers.

Facades Vs. Dependency Injection

One of the primary benefits of dependency injection is the ability to swap implementations of the injected class. This is useful during testing since you can inject a mock or stub and assert that various methods were called on the stub.

Typically, it would not be possible to mock or stub a truly static class method. However, since facades use dynamic methods to proxy method calls to objects resolved from the service container, we actually can test facades just as we would test an injected class instance. For example, given the following route:

use Illuminate\Support\Facades\Cache;

Route::get('/cache', function () {
    return Cache::get('key');
});

We can write the following test to verify that the Cache::get method was called with the argument we expected:

use Illuminate\Support\Facades\Cache;

/**
 * A basic functional test example.
 *
 * @return void
 */
public function testBasicExample()
{
    Cache::shouldReceive('get')
         ->with('key')
         ->andReturn('value');

    $this->visit('/cache')
         ->see('value');
}

Facades Vs. Helper Functions

In addition to facades, Laravel includes a variety of "helper" functions which can perform common tasks like generating views, firing events, dispatching jobs, or sending HTTP responses. Many of these helper functions perform the same function as a corresponding facade. For example, this facade call and helper call are equivalent:

return View::make('profile');

return view('profile');

There is absolutely no practical difference between facades and helper functions. When using helper functions, you may still test them exactly as you would the corresponding facade. For example, given the following route:

Route::get('/cache', function () {
    return cache('key');
});

Under the hood, the cache helper is going to call the get method on the class underlying the Cache facade. So, even though we are using the helper function, we can write the following test to verify that the method was called with the argument we expected:

use Illuminate\Support\Facades\Cache;

/**
 * A basic functional test example.
 *
 * @return void
 */
public function testBasicExample()
{
    Cache::shouldReceive('get')
         ->with('key')
         ->andReturn('value');

    $this->visit('/cache')
         ->see('value');
}

How Facades Work

In a Laravel application, a facade is a class that provides access to an object from the container. The machinery that makes this work is in the Facade class. Laravel's facades, and any custom facades you create, will extend the base Illuminate\Support\Facades\Facade class.

The Facade base class makes use of the __callStatic() magic-method to defer calls from your facade to an object resolved from the container. In the example below, a call is made to the Laravel cache system. By glancing at this code, one might assume that the static method get is being called on the Cache class:

<?php

namespace App\Http\Controllers;

use Cache;
use App\Http\Controllers\Controller;

class UserController extends Controller
{
    /**
     * Show the profile for the given user.
     *
     * @param  int  $id
     * @return Response
     */
    public function showProfile($id)
    {
        $user = Cache::get('user:'.$id);

        return view('profile', ['user' => $user]);
    }
}

Notice that near the top of the file we are "importing" the Cache facade. This facade serves as a proxy to accessing the underlying implementation of the Illuminate\Contracts\Cache\Factory interface. Any calls we make using the facade will be passed to the underlying instance of Laravel's cache service.

If we look at that Illuminate\Support\Facades\Cache class, you'll see that there is no static method get:

class Cache extends Facade
{
    /**
     * Get the registered name of the component.
     *
     * @return string
     */
    protected static function getFacadeAccessor() { return 'cache'; }
}

Instead, the Cache facade extends the base Facade class and defines the method getFacadeAccessor(). This method's job is to return the name of a service container binding. When a user references any static method on the Cache facade, Laravel resolves the cache binding from the service container and runs the requested method (in this case, get) against that object.

Facade Class Reference

Below you will find every facade and its underlying class. This is a useful tool for quickly digging into the API documentation for a given facade root. The service container binding key is also included where applicable.

Facade Class Service Container Binding
App Illuminate\Foundation\Application app
Artisan Illuminate\Contracts\Console\Kernel artisan
Auth Illuminate\Auth\AuthManager auth
Blade Illuminate\View\Compilers\BladeCompiler blade.compiler
Bus Illuminate\Contracts\Bus\Dispatcher  
Cache Illuminate\Cache\Repository cache
Config Illuminate\Config\Repository config
Cookie Illuminate\Cookie\CookieJar cookie
Crypt Illuminate\Encryption\Encrypter encrypter
DB Illuminate\Database\DatabaseManager db
DB (Instance) Illuminate\Database\Connection  
Event Illuminate\Events\Dispatcher events
File Illuminate\Filesystem\Filesystem files
Gate Illuminate\Contracts\Auth\Access\Gate  
Hash Illuminate\Contracts\Hashing\Hasher hash
Lang Illuminate\Translation\Translator translator
Log Illuminate\Log\Writer log
Mail Illuminate\Mail\Mailer mailer
Notification Illuminate\Notifications\ChannelManager  
Password Illuminate\Auth\Passwords\PasswordBrokerManager auth.password
Queue Illuminate\Queue\QueueManager queue
Queue (Instance) Illuminate\Contracts\Queue\Queue queue
Queue (Base Class) Illuminate\Queue\Queue  
Redirect Illuminate\Routing\Redirector redirect
Redis Illuminate\Redis\Database redis
Request Illuminate\Http\Request request
Response Illuminate\Contracts\Routing\ResponseFactory  
Route Illuminate\Routing\Router router
Schema Illuminate\Database\Schema\Blueprint  
Session Illuminate\Session\SessionManager session
Session (Instance) Illuminate\Session\Store  
Storage Illuminate\Contracts\Filesystem\Factory filesystem
URL Illuminate\Routing\UrlGenerator url
Validator Illuminate\Validation\Factory validator
Validator (Instance) Illuminate\Validation\Validator  
View Illuminate\View\Factory view
View (Instance) Illuminate\View\View  

章選択

Dev Environments
Artisan Console
Official Packages

設定

明暗テーマ
light_mode
dark_mode
brightness_auto システム設定に合わせる
テーマ選択
photo_size_select_actual デフォルト
photo_size_select_actual モノクローム(白黒)
photo_size_select_actual Solarized風
photo_size_select_actual GitHub風(青ベース)
photo_size_select_actual Viva(黄緑ベース)
photo_size_select_actual Happy(紫ベース)
photo_size_select_actual Mint(緑ベース)
コードハイライトテーマ選択

明暗テーマごとに、コードハイライトのテーマを指定できます。

テーマ配色確認
スクリーン表示幅
640px
80%
90%
100%

768px以上の幅があるときのドキュメント部分表示幅です。

インデント
無し
1rem
2rem
3rem
原文確認
原文を全行表示
原文を一行ずつ表示
使用しない

※ 段落末のEボタンへカーソルオンで原文をPopupします。

Diff表示形式
色分けのみで区別
行頭の±で区別
削除線と追記で区別

※ [tl!…]形式の挿入削除行の表示形式です。

Pagination和文
ペジネーション
ペギネーション
ページネーション
ページ付け
Scaffold和文
スカフォールド
スキャフォールド
型枠生成
本文フォント

総称名以外はCSSと同様に、"〜"でエスケープしてください。

コードフォント

総称名以外はCSSと同様に、"〜"でエスケープしてください。

保存内容リセット

localStrageに保存してある設定項目をすべて削除し、デフォルト状態へ戻します。

ヘッダー項目移動

キーボード操作