Readouble

Laravel 5.2 Redis

イントロダクションIntroduction

Redisはオープンソースの進歩的なキー/値保存システムです。キーに文字列ハッシュリストセットソート済みセットが使用できるため、データ構造サーバーとしてよく名前が上がります。LaravelでRedisを使う前にpredis/predisパッケージ(~1.0)をComposerでインストールしておく必要があります。Redis[http://redis.io] is an open source, advanced key-value store. It is often referred to as a data structure server since keys can contain strings[http://redis.io/topics/data-types#strings], hashes[http://redis.io/topics/data-types#hashes], lists[http://redis.io/topics/data-types#lists], sets[http://redis.io/topics/data-types#sets], and sorted sets[http://redis.io/topics/data-types#sorted-sets]. Before using Redis with Laravel, you will need to install the predis/predis package (~1.0) via Composer.

設定Configuration

アプリケーションのRedis設定はconfig/database.phpファイルにあります。このファイルの中にredis配列があり、アプリケーションで使用されるRadisサーバーの設定を含んでいます。The Redis configuration for your application is located in the config/database.php configuration file. Within this file, you will see a redis array containing the Redis servers used by your application:

'redis' => [

    'cluster' => false,

    'default' => [
        'host'     => '127.0.0.1',
        'port'     => 6379,
        'database' => 0,
    ],

],

デフォルトのサーバー設定は、開発時には十分でしょう。しかしご自由に自分の環境に合わせてこの配列を変更してください。各Redisサーバーに名前を与え、使用するホストとポートを指定するだけです。The default server configuration should suffice for development. However, you are free to modify this array based on your environment. Simply give each Redis server a name, and specify the host and port used by the server.

ノードをプールしたり、巨大なRAMを使用可能にしたりするため、clusterオプションはRedisノード間に渡りクライアントサイドで共有する指示をLaravel Redisクライアントに対し行います。しかし注意すべきはクライアントサイドの共有ではフェイルオーバーが処理されないことです。そのため主な使い方は、他のプライマリーのデーター域からキャッシュデーターを使用できるようにすることでしょう。The cluster option will tell the Laravel Redis client to perform client-side sharding across your Redis nodes, allowing you to pool nodes and create a large amount of available RAM. However, note that client-side sharding does not handle failover; therefore, is primarily suited for cached data that is available from another primary data store.

Redis接続の定義の中でoptions配列値を定義することも追加で可能で、Predisクライアントオプションの設定を指定できます。Additionally, you may define an options array value in your Redis connection definition, allowing you to specify a set of Predis client options[https://github.com/nrk/predis/wiki/Client-Options].

Redisサーバーが認証を求めている場合、Redisサーバー設定のpasswordオプションへキー/値のペアを指定してください。If your Redis server requires authentication, you may supply a password by adding a password configuration item to your Redis server configuration array.

注意: PECLでRedis PHP拡張をインストールしている場合、config/app.phpファイルのRedisエイリアスをリネームする必要があります。Note: If you have the Redis PHP extension installed via PECL, you will need to rename the alias for Redis in your config/app.php file.

基本的な使用法Basic Usage

Redisファサードのバラエティー豊かなメソッドを呼び出し、Redisを操作できます。Redisファサードは動的メソッドをサポートしています。つまりファサードでどんなRedisコマンドでも呼び出すことができ、そのコマンドは直接Redisへ渡されます。以下の例ではRedisのGETコマンドをRedisファサードのgetメソッドで呼び出しています。You may interact with Redis by calling various methods on the Redis facade[/docs/{{version}}/facades]. The Redis facade supports dynamic methods, meaning you may call any Redis command[http://redis.io/commands] on the facade and the command will be passed directly to Redis. In this example, we will call the GET command on Redis by calling the get method on the Redis facade:

<?php

namespace App\Http\Controllers;

use Redis;
use App\Http\Controllers\Controller;

class UserController extends Controller
{
    /**
     * 指定ユーザーのプロフィール表示
     *
     * @param  int  $id
     * @return Response
     */
    public function showProfile($id)
    {
        $user = Redis::get('user:profile:'.$id);

        return view('user.profile', ['user' => $user]);
    }
}

もちろん前記の通り、RedisファサードでどんなRedisコマンドでも呼び出すことができます。Laravelはmagicメソッドを使いコマンドをRedisサーバーへ送りますので、Redisコマンドで期待されている引数を渡してください。Of course, as mentioned above, you may call any of the Redis commands on the Redis facade. Laravel uses magic methods to pass the commands to the Redis server, so simply pass the arguments the Redis command expects:

Redis::set('name', 'Taylor');

$values = Redis::lrange('names', 5, 10);

サーバーにコマンドを送る別の方法はcommandメソッドを使う方法です。最初の引数にコマンド名、第2引数に値の配列を渡します。Alternatively, you may also pass commands to the server using the command method, which accepts the name of the command as its first argument, and an array of values as its second argument:

$values = Redis::command('lrange', ['name', 5, 10]);

複数のRedis接続の使用Using Multiple Redis Connections

RedisインスタンスをRedis::connectionメソッドの呼び出しで取得できます。You may get a Redis instance by calling the Redis::connection method:

$redis = Redis::connection();

これによりデフォルトのRedisサーバーのインスタンスが取得されます。サーバークラスタリングを使用していない場合、connectionメソッドにサーバー名を指定することで、Redis設定で定義している特定のサーバーを取得できます。This will give you an instance of the default Redis server. If you are not using server clustering, you may pass the server name to the connection method to get a specific server as defined in your Redis configuration:

$redis = Redis::connection('other');

パイプラインコマンドPipelining Commands

一回の操作でサーバーに対し多くのコマンドを送る必要がある場合はパイプラインを使うべきでしょう。pipelineメソッドは引数をひとつだけ取り、Redisインスタンスを取る「クロージャ」です。このRedisインスタンスで全コマンドを発行し、一回の操作で全部実行できます。Pipelining should be used when you need to send many commands to the server in one operation. The pipeline method accepts one argument: a Closure that receives a Redis instance. You may issue all of your commands to this Redis instance and they will all be executed within a single operation:

Redis::pipeline(function ($pipe) {
    for ($i = 0; $i < 1000; $i  ) {
        $pipe->set("key:$i", $i);
    }
});

発行/購読Pub / Sub

さらにLaravelはRedisのpublishsubscribeコマンドの便利なインターフェイスも提供しています。これらのRedisコマンドは指定した「チャンネル」のメッセージをリッスンできるようにしてくれます。他のアプリケーションからこのチャンネルにメッセージを公開するか、他の言語を使うこともでき、これによりアプリケーション/プロセス間で簡単に通信できます。Laravel also provides a convenient interface to the Redis publish and subscribe commands. These Redis commands allow you to listen for messages on a given "channel". You may publish messages to the channel from another application, or even using another programming language, allowing easy communication between applications / processes.

最初にsubscribeメソッドでRedisを経由するチャンネルのリスナを準備します。subscribeメソッドは長時間動作するプロセスを開始しますので、このメソッドはArtisanコマンドの中で呼び出します。First, let's setup a listener on a channel via Redis using the subscribe method. We will place this method call within an Artisan command[/docs/{{version}}/artisan] since calling the subscribe method begins a long-running process:

<?php

namespace App\Console\Commands;

use Redis;
use Illuminate\Console\Command;

class RedisSubscribe extends Command
{
    /**
     * コンソールコマンドの名前と使用法
     *
     * @var string
     */
    protected $signature = 'redis:subscribe';

    /**
     * コンソールコマンドの説明
     *
     * @var string
     */
    protected $description = 'Subscribe to a Redis channel';

    /**
     * コンソールコマンドの実行
     *
     * @return mixed
     */
    public function handle()
    {
        Redis::subscribe(['test-channel'], function($message) {
            echo $message;
        });
    }
}

これでpublishメソッドを使いチャンネルへメッセージを公開できます。Now, we may publish messages to the channel using the publish method:

Route::get('publish', function () {
    // Route logic...

    Redis::publish('test-channel', json_encode(['foo' => 'bar']));
});

ワイルドカード購入Wildcard Subscriptions

psubscribeメソッドでワイルドカードチャネルに対し購入できます。全チャンネルの全メッセージを補足するために便利です。$channel名は指定するコールバックの第2引数として渡されます。Using the psubscribe method, you may subscribe to a wildcard channel, which is useful for catching all messages on all channels. The $channel name will be passed as the second argument to the provided callback Closure:

Redis::psubscribe(['*'], function($message, $channel) {
    echo $message;
});

Redis::psubscribe(['users.*'], function($message, $channel) {
    echo $message;
});

章選択

設定

明暗テーマ
light_mode
dark_mode
brightness_auto システム設定に合わせる
テーマ選択
photo_size_select_actual デフォルト
photo_size_select_actual モノクローム(白黒)
photo_size_select_actual Solarized風
photo_size_select_actual GitHub風(青ベース)
photo_size_select_actual Viva(黄緑ベース)
photo_size_select_actual Happy(紫ベース)
photo_size_select_actual Mint(緑ベース)
コードハイライトテーマ選択

明暗テーマごとに、コードハイライトのテーマを指定できます。

テーマ配色確認
スクリーン表示幅
640px
80%
90%
100%

768px以上の幅があるときのドキュメント部分表示幅です。

インデント
無し
1rem
2rem
3rem
原文確認
原文を全行表示
原文を一行ずつ表示
使用しない

※ 段落末のEボタンへカーソルオンで原文をPopupします。

Diff表示形式
色分けのみで区別
行頭の±で区別
削除線と追記で区別

※ [tl!…]形式の挿入削除行の表示形式です。

Pagination和文
ペジネーション
ペギネーション
ページネーション
ページ付け
Scaffold和文
スカフォールド
スキャフォールド
型枠生成
本文フォント

総称名以外はCSSと同様に、"〜"でエスケープしてください。

コードフォント

総称名以外はCSSと同様に、"〜"でエスケープしてください。

保存内容リセット

localStrageに保存してある設定項目をすべて削除し、デフォルト状態へ戻します。

ヘッダー項目移動

キーボード操作