Readouble

Laravel 5.2 タスクスケジュール

イントロダクションIntroduction

コンソールコマンドを一つ一つスケジュールするため、今まで開発者はCronエントリーを毎回作成してきました。しかしこれは悩みの種でした。コンソールの実行スケジュールはソース管理されていませんでしたし、Cronのエントリを追加するためにその都度SSHでサーバーに接続する必要がありました。人生をより簡単に生きましょう。Laravelコマンドスケジューラーを使い、サーバーにCronエントリーを一つ追加するだけで、他に何も用意しなくてもLaravelだけでコマンド実行スケジュールをスラスラと記述的に定義することができます。In the past, developers have generated a Cron entry for each task they need to schedule. However, this is a headache. Your task schedule is no longer in source control, and you must SSH into your server to add the Cron entries. The Laravel command scheduler allows you to fluently and expressively define your command schedule within Laravel itself, and only a single Cron entry is needed on your server.

コマンドスケジュールはapp/Console/Kernel.phpファイルに記述します。このクラスの中にscheduleメソッドが見つかるでしょう。始めやすいように、このメソッドの中に簡単な例を準備してあります。好きなだけジョブスケジュールをScheduleオブジェクトに追加してください。Your task schedule is defined in the app/Console/Kernel.php file's schedule method. To help you get started, a simple example is included with the method. You are free to add as many scheduled tasks as you wish to the Schedule object.

スケジューラーを使いはじめるStarting The Scheduler

唯一以下のCronエントリーだけ、サーバーに追加してください。Here is the only Cron entry you need to add to your server:

* * * * * php /path/to/artisan schedule:run >> /dev/null 2>&1

このCronエントリは、Laravelコマンドスケジューラーを毎分呼び出します。それにより、Laravelはスケジュールされているジョブを評価し、実行する必要のあるジョブを起動します。これ以上簡単にできません!This Cron will call the Laravel command scheduler every minute. Then, Laravel evaluates your scheduled tasks and runs the tasks that are due.

スケジュール定義Defining Schedules

スケジュールタスクは全部App\Console\Kernelクラスのscheduleメソッドの中に定義します。手始めに、スケジュールタスクの例を見てください。この例は毎日深夜12時に「クロージャ」をスケジュールしています。「クロージャ」の中でテーブルをクリアするデータベースクエリを実行しています。You may define all of your scheduled tasks in the schedule method of the App\Console\Kernel class. To get started, let's look at an example of scheduling a task. In this example, we will schedule a Closure to be called every day at midnight. Within the Closure we will execute a database query to clear a table:

<?php

namespace App\Console;

use DB;
use Illuminate\Console\Scheduling\Schedule;
use Illuminate\Foundation\Console\Kernel as ConsoleKernel;

class Kernel extends ConsoleKernel
{
    /**
     * アプリケーションで提供するArtisanコマンド
     *
     * @var array
     */
    protected $commands = [
        \App\Console\Commands\Inspire::class,
    ];

    /**
     * アプリケーションのコマンド実行スケジュール定義
     *
     * @param  \Illuminate\Console\Scheduling\Schedule  $schedule
     * @return void
     */
    protected function schedule(Schedule $schedule)
    {
        $schedule->call(function () {
            DB::table('recent_users')->delete();
        })->daily();
    }
}

「クロージャ」の呼び出しをスケジュールするほかにArtisanコマンドとオペレーティングシステムコマンドを実行できます。例としてArtisanコマンドをスケジュールするcommandメソッドを使ってみましょう。In addition to scheduling Closure calls, you may also schedule Artisan commands[/docs/{{version}}/artisan] and operating system commands. For example, you may use the command method to schedule an Artisan command:

$schedule->command('emails:send --force')->daily();

オペレーティングシステムでコマンドを実行するためにはexecメソッドを使います。The exec command may be used to issue a command to the operating system:

$schedule->exec('node /home/forge/script.js')->daily();

繰り返しのスケジュールオプションSchedule Frequency Options

もちろん、タスクは様々なスケジュールを割り付けることができます。Of course, there are a variety of schedules you may assign to your task:

メソッドMethod 説明Description
->cron('* * * * * *');->cron('* * * * * *'); CRON記法によるスケジュールRun the task on a custom Cron schedule
->everyMinute();->everyMinute(); 毎分タスク実行Run the task every minute
->everyFiveMinutes();->everyFiveMinutes(); 5分毎にタスク実行Run the task every five minutes
->everyTenMinutes();->everyTenMinutes(); 10分毎にタスク実行Run the task every ten minutes
->everyThirtyMinutes();->everyThirtyMinutes(); 30分毎にタスク実行Run the task every thirty minutes
->hourly();->hourly(); 毎時タスク実行Run the task every hour
->daily();->daily(); 毎日深夜12時に実行Run the task every day at midnight
->dailyAt('13:00');->dailyAt('13:00'); 毎日13:00に実行Run the task every day at 13:00
->twiceDaily(1, 13);->twiceDaily(1, 13); 毎日1:00と13:00時に実行Run the task daily at 1:00 & 13:00
->weekly();->weekly(); 毎週実行Run the task every week
->monthly();->monthly(); 毎月実行Run the task every month
->monthlyOn(4, '15:00');->monthlyOn(4, '15:00'); 毎月4日の15:00に実行Run the task every month on the 4th at 15:00
->quarterly();->quarterly(); 四半期ごとに実行Run the task every quarter
->yearly();->yearly(); 毎年実行Run the task every year
->timezone('America/New_York');->timezone('America/New_York'); タイムゾーン設定Set the timezone

これらのメソッドは週の特定の曜日だけに実行させるために、追加の制約と組み合わせ細かく調整できます。These methods may be combined with additional constraints to create even more finely tuned schedules that only run on certain days of the week. For example, to schedule a command to run weekly on Monday:

// 週に一回、月曜の13:00に実行
$schedule->call(function () {
    //
})->weekly()->mondays()->at('13:00');

// ウィークエンドの8時から17時まで一時間ごとに実行
$schedule->command('foo')
          ->weekdays()
          ->hourly()
          ->timezone('America/Chicago')
          ->when(function () {
                return date('H') >= 8 && date('H') <= 17;
          });

以下が追加のスケジュール制約のリストです。Below is a list of the additional schedule constraints:

メソッドMethod 説明Description
->weekdays();->weekdays(); ウイークデーのみに限定Limit the task to weekdays
->sundays();->sundays(); 日曜だけに限定Limit the task to Sunday
->mondays();->mondays(); 月曜だけに限定Limit the task to Monday
->tuesdays();->tuesdays(); 火曜だけに限定Limit the task to Tuesday
->wednesdays();->wednesdays(); 水曜だけに限定Limit the task to Wednesday
->thursdays();->thursdays(); 木曜だけに限定Limit the task to Thursday
->fridays();->fridays(); 金曜だけに限定Limit the task to Friday
->saturdays();->saturdays(); 土曜だけに限定Limit the task to Saturday
->when(Closure);->when(Closure); クロージャの戻り値がtureの時のみに限定Limit the task based on a truth test

真値テスト制約Truth Test Constraints

whenメソッドは指定した真値テストの結果に基づき制限を実行します。言い換えれば指定した「クロージャ」がtureを返し、他の制約が実行を停止しない限りタスクを実行します。The when method may be used to limit the execution of a task based on the result of a given truth test. In other words, if the given Closure returns true, the task will execute as long as no other constraining conditions prevent the task from running:

$schedule->command('emails:send')->daily()->when(function () {
    return true;
});

skipメソッドはwhenをひっくり返したものです。skipメソッドへ渡したクロージャがtrueを返した時、スケジュールタスクは実行されません。The skip method may be seen as the inverse of when. If the skip method returns true, the scheduled task will not be executed:

$schedule->command('emails:send')->daily()->skip(function () {
    return true;
});

whenメソッドをいくつかチェーンした場合は、全部のwhen条件がtrueを返すときのみスケジュールされたコマンドが実行されます。When using chained when methods, the scheduled command will only execute if all when conditions return true.

タスク多重起動の防止Preventing Task Overlaps

デフォルトでは以前の同じジョブが起動中であっても、スケジュールされたジョブは実行されます。これを防ぐには、withoutOverlappingメソッドを使用してください。By default, scheduled tasks will be run even if the previous instance of the task is still running. To prevent this, you may use the withoutOverlapping method:

$schedule->command('emails:send')->withoutOverlapping();

この例の場合、emails:send Artisanコマンドは実行中でない限り毎分実行されます。withoutOverlappingメソッドは指定したタスクの実行時間の変動が非常に大きく、予想がつかない場合に特に便利です。In this example, the emails:send Artisan command[/docs/{{version}}/artisan] will be run every minute if it is not already running. The withoutOverlapping method is especially useful if you have tasks that vary drastically in their execution time, preventing you from predicting exactly how long a given task will take.

タスク出力Task Output

Laravelスケジューラーはスケジュールしたタスクが生成する出力を取り扱う便利なメソッドをたくさん用意しています。最初にsendOutputToメソッドを使い、後ほど内容を調べられるようにファイルへ出力してみましょう。The Laravel scheduler provides several convenient methods for working with the output generated by scheduled tasks. First, using the sendOutputTo method, you may send the output to a file for later inspection:

$schedule->command('emails:send')
         ->daily()
         ->sendOutputTo($filePath);

出力を指定したファイルに追加したい場合は、appendOutputToメソッドを使います。If you would like to append the output to a given file, you may use the appendOutputTo method:

$schedule->command('emails:send')
         ->daily()
         ->appendOutputTo($filePath);

emailOutputToメソッドを使えば、選択したメールアドレスへ出力をメールで送ることができます。最初にsendOutputToメソッドを使い、ファイルへ出力しておく必要があることに注意してください。また、タスクの出力をメールで送る前に、Laravelのメールサービスの設定を済ませておく必要もあります。Using the emailOutputTo method, you may e-mail the output to an e-mail address of your choice. Note that the output must first be sent to a file using the sendOutputTo method. Also, before e-mailing the output of a task, you should configure Laravel's e-mail services[/docs/{{version}}/mail]:

$schedule->command('foo')
         ->daily()
         ->sendOutputTo($filePath)
         ->emailOutputTo('foo@example.com');

注意: emailOutputTosendOutputToメソッドはcommandメソッド専用で、callメソッドはサポートしていません。Note: The emailOutputTo and sendOutputTo methods are exclusive to the command method and are not supported for call.

タスクフックTask Hooks

beforeafterメソッドを使えば、スケジュールされたタスクの実行前後に指定したコードを実行することができます。Using the before and after methods, you may specify code to be executed before and after the scheduled task is complete:

$schedule->command('emails:send')
         ->daily()
         ->before(function () {
             // タスク開始時…
         })
         ->after(function () {
             // タスク終了時…
         });

URLへのPingPinging URLs

pingBeforethenPingメソッドを使用し、タスク実行前後に指定したURLへ自動的にPingすることができます。これはLaravel Envoyerのような外部サービスへスケジュールされたタスクが始まる、または完了したことを知らせるのに便利です。Using the pingBefore and thenPing methods, the scheduler can automatically ping a given URL before or after a task is complete. This method is useful for notifying an external service, such as Laravel Envoyer[https://envoyer.io], that your scheduled task is commencing or complete:

$schedule->command('emails:send')
         ->daily()
         ->pingBefore($url)
         ->thenPing($url);

pingBefore($url)thenPing($url)のどちらを使用するにも、Guzzle HTTPライブラリーが必要です。Guzzleはcomposer.jsonファイルに以下の行を追加してプロジェクトに追加できます。Using either the pingBefore($url) or thenPing($url) feature requires the Guzzle HTTP library. You can add Guzzle to your project by adding the following line to your composer.json file:

"guzzlehttp/guzzle": "~5.3|~6.0"

章選択

設定

明暗テーマ
light_mode
dark_mode
brightness_auto システム設定に合わせる
テーマ選択
photo_size_select_actual デフォルト
photo_size_select_actual モノクローム(白黒)
photo_size_select_actual Solarized風
photo_size_select_actual GitHub風(青ベース)
photo_size_select_actual Viva(黄緑ベース)
photo_size_select_actual Happy(紫ベース)
photo_size_select_actual Mint(緑ベース)
コードハイライトテーマ選択

明暗テーマごとに、コードハイライトのテーマを指定できます。

テーマ配色確認
スクリーン表示幅
640px
80%
90%
100%

768px以上の幅があるときのドキュメント部分表示幅です。

インデント
無し
1rem
2rem
3rem
原文確認
原文を全行表示
原文を一行ずつ表示
使用しない

※ 段落末のEボタンへカーソルオンで原文をPopupします。

Diff表示形式
色分けのみで区別
行頭の±で区別
削除線と追記で区別

※ [tl!…]形式の挿入削除行の表示形式です。

Pagination和文
ペジネーション
ペギネーション
ページネーション
ページ付け
Scaffold和文
スカフォールド
スキャフォールド
型枠生成
本文フォント

総称名以外はCSSと同様に、"〜"でエスケープしてください。

コードフォント

総称名以外はCSSと同様に、"〜"でエスケープしてください。

保存内容リセット

localStrageに保存してある設定項目をすべて削除し、デフォルト状態へ戻します。

ヘッダー項目移動

キーボード操作