Readouble

Laravel master 認証

イントロダクションIntroduction

lightbulb">Tip!! さっさと始めたいですか? インストールしたてのLaravelアプリケーションでphp artisan make:authphp artisan migrateを実行するだけです。それから、ブラウザでhttp://your-app.dev/register、もしくはアプリケーションに割りつけたその他のURLへアクセスしてください。この2つのコマンドが、認証システム全体のスカフォールドを面倒みます。{tip} Want to get started fast? Just run php artisan make:auth and php artisan migrate in a fresh Laravel application. Then, navigate your browser to http://your-app.dev/register or any other URL that is assigned to your application. These two commands will take care of scaffolding your entire authentication system!

Laravelでは簡単に認証が実装できます。実際ほとんど全て最初から設定済みです。認証の設定ファイルはconfig/auth.phpに用意してあり、認証サービスの振る舞いを調整できるように、読みやすいコメント付きでたくさんのオプションが用意されています。Laravel makes implementing authentication very simple. In fact, almost everything is configured for you out of the box. The authentication configuration file is located at config/auth.php, which contains several well documented options for tweaking the behavior of the authentication services.

Laravelの認証機能は「ガード」と「プロバイダ」を中心概念として構成されています。ガードは各リクエストごとに、どのようにユーザを認証するかを定義します。たとえば、Laravelにはセッションストレージとクッキーを使いながら状態を維持するsessionガードが用意されています。At its core, Laravel's authentication facilities are made up of "guards" and "providers". Guards define how users are authenticated for each request. For example, Laravel ships with a session guard which maintains state using session storage and cookies.

プロバイダは永続ストレージから、どのようにユーザを取得するかを定義します。LaravelはEloquentとデータベースクリエビルダを使用しユーザを取得する機能を用意しています。しかし、アプリケーションの必要性に応じて、自由にプロバイダを追加できます。Providers define how users are retrieved from your persistent storage. Laravel ships with support for retrieving users using Eloquent and the database query builder. However, you are free to define additional providers as needed for your application.

混乱しても心配ありません。通常のアプリケーションでは、デフォルトの認証設定を変更する必要はありません。Don't worry if this all sounds confusing now! Many applications will never need to modify the default authentication configuration.

データベースの検討事項Database Considerations

デフォルトととしてLaravelは、App\User Eloquentモデルappディレクトリに用意しています。このモデルはデフォルトEloquent認証ドライバで使用しています。もしアプリケーションでEloquentを使用しなければ、Laravelクエリビルダを使用するdatabase認証ドライバを使用する必要があります。By default, Laravel includes an App\User Eloquent model[/docs/{{version}}/eloquent] in your app directory. This model may be used with the default Eloquent authentication driver. If your application is not using Eloquent, you may use the database authentication driver which uses the Laravel query builder.

App\Userモデルのデータベーススキマー構築時に、確実にパスワードカラムを最低60文字確保してください。デフォルトの255文字にするのが、良い方法でしょう。When building the database schema for the App\User model, make sure the password column is at least 60 characters in length. Maintaining the default string column length of 255 characters would be a good choice.

さらにusers、もしくは同等の働きをするテーブルには、100文字のremember_token文字列カラムも含めてください。このカラムはログイン時に、アプリケーションで"remember me"を選んだユーザのトークンを保存しておくカラムとして使用されます。Also, you should verify that your users (or equivalent) table contains a nullable, string remember_token column of 100 characters. This column will be used to store a token for users that select the "remember me" option when logging into your application.

認証 QuickstartAuthentication Quickstart

App\Http\Controllers\Auth名前空間下に多くの組み込み済み認証コントローラがLaravelにより用意されています。RegisterControllerは新ユーザの登録、LoginControllerは認証処理、ForgotPasswordControllerはパスワードリセットのためのメールリンク処理、ResetPasswordControllerはパスワードリセット処理を行います。各コントローラは必要なメソッドを含むトレイトを使用しています。多くのコントローラでは、これらのコントローラを変更する必要は全くありません。Laravel ships with several pre-built authentication controllers, which are located in the App\Http\Controllers\Auth namespace. The RegisterController handles new user registration, the LoginController handles authentication, the ForgotPasswordController handles e-mailing links for resetting passwords, and the ResetPasswordController contains the logic to reset passwords. Each of these controllers uses a trait to include their necessary methods. For many applications, you will not need to modify these controllers at all.

ルート定義Routing

簡単なコマンド一つで、認証に必要となるルート定義とビューをすべてスカフォールディングできる、簡単な手段をLaravelは提供しています。Laravel provides a quick way to scaffold all of the routes and views you need for authentication using one simple command:

php artisan make:auth

このコマンドは新しくインストールしたアプリケーションでのみ実行すべきで、レイアウトビュー、登録ログインビューをインストールし、同時にすべての認証エンドポイントのルートも定義します。HomeControllerも、ログイン後に必要となる、アプリケーションのダッシュボードのために生成されます。This command should be used on fresh applications and will install a layout view, registration and login views, as well as routes for all authentication end-points. A HomeController will also be generated to handle post-login requests to your application's dashboard.

ビューViews

前のセクションで説明したとおり、php artisan make:authコマンドはresources/views/authディレクトリへ、認証に必要なすべてのビューを生成します。As mentioned in the previous section, the php artisan make:auth command will create all of the views you need for authentication and place them in the resources/views/auth directory.

make:authコマンドはresources/views/layoutsディレクトリにアプリケーションのベースレイアウトビューも生成します。これらのビューはすべてBootstrap CSSフレームワークを使用していますが、自由にカスタマイズしてください。The make:auth command will also create a resources/views/layouts directory containing a base layout for your application. All of these views use the Bootstrap CSS framework, but you are free to customize them however you wish.

認証Authenticating

これで、認証コントローラを含め、必要なルートとビューの準備が整いました。アプリケーションに新しいユーザを登録し、認証できるようになりました。ブラウザでアプリケーションへアクセスしてください。認証コントローラは(内部で使用しているトレイトにより)、既存ユーザの認証と、新しいユーザをデータベースへ保存するロジックをすでに備えています。Now that you have routes and views setup for the included authentication controllers, you are ready to register and authenticate new users for your application! You may simply access your application in a browser since the authentication controllers already contain the logic (via their traits) to authenticate existing users and store new users in the database.

パスのカスタマイズPath Customization

ユーザが認証に成功すると、/homeのURIへリダイレクトします。これをカスタマイズするには、LoginControllerRegisterControllerResetPasswordControllerredirectToプロパティで、認証後のリダイレクト先の場所を定義してください。When a user is successfully authenticated, they will be redirected to the /home URI. You can customize the post-authentication redirect location by defining a redirectTo property on the LoginController, RegisterController, and ResetPasswordController:

protected $redirectTo = '/';

ユーザが認証に失敗した場合、自動的にログインフォームへリダイレクトします。When a user is not successfully authenticated, they will be automatically redirected back to the login form.

ガードのカスタマイズGuard Customization

更に、登録済みユーザを認証するために使用する「ガード」をカスタマイズすることも可能です。LoginControllerRegisterControllerResetPasswordControllerguardメソッドを定義してください。メソッドからガードインスタンスを返してください。You may also customize the "guard" that is used to authenticate and register users. To get started, define a guard method on your LoginController, RegisterController, and ResetPasswordController. The method should return a guard instance:

use Illuminate\Support\Facades\Auth;

protected function guard()
{
    return Auth::guard('guard-name');
}

バリデーション/保管域のカスタマイズValidation / Storage Customization

アプリケーションに新しいユーザを登録する場合に入力してもらうフォームのフィールドを変更するか、データベースに新しいユーザレコードを登録する方法をカスタマイズしたい場合は、RegisterControllerクラスを変更してください。このクラスはアプリケーションで新しいユーザのバリデーションと作成に責任を持っています。To modify the form fields that are required when a new user registers with your application, or to customize how new users are stored into your database, you may modify the RegisterController class. This class is responsible for validating and creating new users of your application.

RegisterControllervalidatorメソッドはアプリケーションの新しいユーザに対するバリデーションルールで構成されています。このメソッドはお気に召すまま自由に変更してください。The validator method of the RegisterController contains the validation rules for new users of the application. You are free to modify this method as you wish.

RegisterControllercreateメソッドは新しいApp\UserレコードをEloquent ORMを使用し、データベースに作成することに責任を持っています。データベースの必要に合わせて自由にこのメソッドを変更してください。The create method of the RegisterController is responsible for creating new App\User records in your database using the Eloquent ORM[/docs/{{version}}/eloquent]. You are free to modify this method according to the needs of your database.

認証済みユーザの取得Retrieving The Authenticated User

Authファサードを使えば認証済みユーザへ簡単にアクセスできます。You may access the authenticated user via the Auth facade:

use Illuminate\Support\Facades\Auth;

$user = Auth::user();

もしくは、ユーザが認証済みであれば、Illuminate\Http\Requestインスタンス経由で、ユーザへアクセスすることもできます。コントローラメソッドでタイプヒントしたクラスは、自動的にインスタンスが依存注入されることを思い出してください。Alternatively, once a user is authenticated, you may access the authenticated user via an Illuminate\Http\Request instance. Remember, type-hinted classes will automatically be injected into your controller methods:

<?php

namespace App\Http\Controllers;

use Illuminate\Http\Request;

class ProfileController extends Controller
{
    /**
     * ユーザプロフィールの更新
     *
     * @param  Request  $request
     * @return Response
     */
    public function update(Request $request)
    {
        // $request->user()は認証済みユーザのインスタンスを返す
    }
}

現在のユーザが認証されているか調べるDetermining If The Current User Is Authenticated

ユーザが既にアプリケーションにログインしているかを調べるには、Authファサードのcheckメソッドが使えます。認証時にtrueを返します。To determine if the user is already logged into your application, you may use the check method on the Auth facade, which will return true if the user is authenticated:

use Illuminate\Support\Facades\Auth;

if (Auth::check()) {
    // ユーザはログインしている
}

lightbulb">Tip!! checkメソッドを使っても、あるユーザが認証済みであるかを判定可能です。特定のルートやコントローラーへユーザをアクセスさせる前に、認証済みであるかをミドルウェアにより確認する場合、典型的に使用します。より詳細についてはルートの保護のドキュメントを参照してください。{tip} Even though it is possible to determine if a user is authenticated using the check method, you will typically use a middleware to verify that the user is authenticated before allowing the user access to certain routes / controllers. To learn more about this, check out the documentation on protecting routes[/docs/{{version}}/authentication#protecting-routes].

ルートの保護Protecting Routes

ルートミドルウェアは特定のルートに対し、認証済みユーザのみアクセスを許すために使われます。LaravelにはIlluminate\Auth\Middleware\Authenticateの中で定義されているauthミドルウェアが最初から用意されています。このミドルウェアは、HTTPカーネルで登録済みのため、必要なのはルート定義でこのミドルウェアを指定するだけです。Route middleware[/docs/{{version}}/middleware] can be used to only allow authenticated users to access a given route. Laravel ships with an auth middleware, which is defined at Illuminate\Auth\Middleware\Authenticate. Since this middleware is already registered in your HTTP kernel, all you need to do is attach the middleware to a route definition:

Route::get('profile', function() {
    // 認証済みのユーザのみが入れる
})->middleware('auth');

もちろんコントローラーを使っていれば、ルート定義に付加する代わりに、コントローラーのコンストラクターでmiddlewareメソッドを呼び出すことができます。Of course, if you are using controllers[/docs/{{version}}/controllers], you may call the middleware method from the controller's constructor instead of attaching it in the route definition directly:

public function __construct()
{
    $this->middleware('auth');
}

ガードの指定Specifying A Guard

authミドルウェアをルートに対し指定するときに、そのユーザに対し認証を実行するガードを指定することもできます。指定されたガードは、auth.php設定ファイルのguards配列のキーを指定します。When attaching the auth middleware to a route, you may also specify which guard should be used to authenticate the user. The guard specified should correspond to one of the keys in the guards array of your auth.php configuration file:

public function __construct()
{
    $this->middleware('auth:api');
}

認証回数制限Login Throttling

Laravelの組み込みLoginControllerクラスを使用している場合、Illuminate\Foundation\Auth\ThrottlesLoginsトレイトが最初からコントローラで取り込まれています。デフォルトでは何度も正しくログインできなかった後、一分間ログインできなくなります。制限はユーザの名前/メールアドレスとIPアドレスで限定されます。If you are using Laravel's built-in LoginController class, the Illuminate\Foundation\Auth\ThrottlesLogins trait will already be included in your controller. By default, the user will not be able to login for one minute if they fail to provide the correct credentials after several attempts. The throttling is unique to the user's username / e-mail address and their IP address.

自前のユーザ認証Manually Authenticating Users

もちろん、Laravelに含まれる認証コントローラーを使うことを強要しているわけでありません。これらのコントローラーを削除する選択肢を選ぶのなら、Laravel認証クラスを直接使用しユーザの認証を管理する必要があります。心配ありません。それでも簡単です!Of course, you are not required to use the authentication controllers included with Laravel. If you choose to remove these controllers, you will need to manage user authentication using the Laravel authentication classes directly. Don't worry, it's a cinch!

Laravelの認証サービスにはAuthファサードでアクセスできます。クラスの最初でAuthファサードを確実にインポートしておきましょう。次にattemptメソッドを見てみましょう。We will access Laravel's authentication services via the Auth facade[/docs/{{version}}/facades], so we'll need to make sure to import the Auth facade at the top of the class. Next, let's check out the attempt method:

<?php

namespace App\Http\Controllers;

use Illuminate\Support\Facades\Auth;

class AuthController extends Controller
{
    /**
     * 認証を処理する
     *
     * @return Response
     */
    public function authenticate()
    {
        if (Auth::attempt(['email' => $email, 'password' => $password])) {
            // 認証に成功した
            return redirect()->intended('dashboard');
        }
    }
}

attemptメソッドは最初の引数として、キー/値ペアの配列を受け取ります。配列中の他の値は、データベーステーブルの中からそのユーザを見つけるために使用されます。ですから、上の例ではemailカラムの値により、ユーザが取得されます。ユーザが見つかれば、配列でメソッドに渡されたハッシュ済みのpassword値と、データベースに保存してあったハッシュ済みpasswordが比較されます。2つのハッシュ済みパスワードが一致したら、そのユーザの新しい認証セッションが開始されます。The attempt method accepts an array of key / value pairs as its first argument. The values in the array will be used to find the user in your database table. So, in the example above, the user will be retrieved by the value of the email column. If the user is found, the hashed password stored in the database will be compared with the hashed password value passed to the method via the array. If the two hashed passwords match an authenticated session will be started for the user.

attemptメソッドは、認証が成功すればtrueを返します。失敗時はfalseを返します。The attempt method will return true if authentication was successful. Otherwise, false will be returned.

リダイレクタ―のintendedメソッドは、認証フィルターにかかる前にアクセスしようとしていたURLへ、ユーザをリダイレクトしてくれます。そのリダイレクトが不可能な場合の移動先として、フォールバックURIをこのメソッドに指定してください。The intended method on the redirector will redirect the user to the URL they were attempting to access before being intercepted by the authentication middleware. A fallback URI may be given to this method in case the intended destination is not available.

追加条件の指定Specifying Additional Conditions

お望みであれば、ユーザのメールアドレスとパスワードに付け加え、認証時のクエリに追加の条件を指定することも可能です。If you wish, you also may add extra conditions to the authentication query in addition to the user's e-mail and password. For example, we may verify that user is marked as "active":

if (Auth::attempt(['email' => $email, 'password' => $password, 'active' => 1])) {
    // ユーザは存在しており、かつアクティブで、資格停止されていない
}

Note: note この例のように、emailを必ず認証に使用しなくてならない訳ではありません。データーベース中にあるユーザ名(username)に該当する、一意にユーザを特定できるカラムであれば何でも使用できます。{note} In these examples, email is not a required option, it is merely used as an example. You should use whatever column name corresponds to a "username" in your database.

特定のGuardインスタンスへのアクセスAccessing Specific Guard Instances

Authファサードのguardメソッドにより、使用したいガードインスタンスを指定できます。これにより全く異なった認証用のモデルやユーザテーブルを使い、アプリケーションの別々の部分に対する認証を管理することができます。You may specify which guard instance you would like to utilize using the guard method on the Auth facade. This allows you to manage authentication for separate parts of your application using entirely separate authenticatable models or user tables.

guardメソッドへ渡すガード名は、auth.php認証ファイルのguards設定の一つと対応している必要があります。The guard name passed to the guard method should correspond to one of the guards configured in your auth.php configuration file:

if (Auth::guard('admin')->attempt($credentials)) {
    //
}

ログアウトLogging Out

アプリケーションからユーザをログアウトさせるには、Authファサードのlogoutメソッドを使用してください。これはユーザセッションの認証情報をクリアします。To log users out of your application, you may use the logout method on the Auth facade. This will clear the authentication information in the user's session:

Auth::logout();

継続ログインRemembering Users

アプリケーションでログイン維持(Remember me)機能を持たせたい場合は、attemptメソッドの第2引数に論理値を指定します。ユーザが自分でログアウトしない限り、認証が無期限に持続するようになります。もちろん、"remember me"トークンを保存するために使用する文字列のremember_tokenカラムをusersテーブルに持たせる必要があります。If you would like to provide "remember me" functionality in your application, you may pass a boolean value as the second argument to the attempt method, which will keep the user authenticated indefinitely, or until they manually logout. Of course, your users table must include the string remember_token column, which will be used to store the "remember me" token.

if (Auth::attempt(['email' => $email, 'password' => $password], $remember)) {
    // このメンバーは継続ログインされる
}

lightbulb">Tip!! Laravelに用意されている、組み込みLoginControllerを使用する場合、このコントローラが使用しているトレイトにより、"remember"ユーザを確実に処理するロジックが実装済みです。。{tip} If you are using the built-in LoginController that is shipped with Laravel, the proper logic to "remember" users is already implemented by the traits used by the controller.

この機能を使用している時に、ユーザが"remember me"クッキーを使用して認証されているかを判定するには、viaRememberメソッドを使用します。If you are "remembering" users, you may use the viaRemember method to determine if the user was authenticated using the "remember me" cookie:

if (Auth::viaRemember()) {
    //
}

他の認証方法Other Authentication Methods

Userインスタンスによる認証Authenticate A User Instance

既に存在しているユーザインスタンスでアプリケーションにログインさせる必要があれば、loginメソッドにそのユーザインスタンスを指定し呼び出してください。指定されたオブジェクトはIlluminate\Contracts\Auth\Authenticatable契約を実装している必要があります。もちろん、Laravelが用意しているApp\Userモデルはこのインターフェイスを実装しています。If you need to log an existing user instance into your application, you may call the login method with the user instance. The given object must be an implementation of the Illuminate\Contracts\Auth\Authenticatable contract[/docs/{{version}}/contracts]. Of course, the App\User model included with Laravel already implements this interface:

Auth::login($user);

// 指定したユーザでログインし、"remember"にする
Auth::login($user, true);

もちろん、使用したいガードインスタンスを指定することもできます。Of course, you may specify the guard instance you would like to use:

Auth::guard('admin')->login($user);

IDによるユーザ認証Authenticate A User By ID

ユーザをアプリケーションへIDによりログインさせる場合は、loginUsingIdメソッドを使います。このメソッドは認証させたいユーザの主キーだけを引数に受け取ります。To log a user into the application by their ID, you may use the loginUsingId method. This method simply accepts the primary key of the user you wish to authenticate:

Auth::loginUsingId(1);

// 指定したユーザでログインし、"remember"にする
Auth::loginUsingId(1, true);

ユーザを一度だけ認証するAuthenticate A User Once

onceメソッドを使用すると、アプリケーションにユーザをそのリクエストの間だけログインさせることができます。セッションもクッキーも使用しないため、ステートレスなAPIを構築する場合に便利です。You may use the once method to log a user into the application for a single request. No sessions or cookies will be utilized, which means this method may be helpful when building a stateless API:

if (Auth::once($credentials)) {
    //
}

HTTP基本認証HTTP Basic Authentication

HTTP基本認証により、専用の「ログイン」ページを用意しなくても手っ取り早くアプリケーションにユーザをログインさせられます。これを使用するには、ルートにauth.basicミドルウェアを付けてください。auth.basicミドルウェアはLaravelフレームワークに含まれているので、定義する必要はありません。HTTP Basic Authentication[http://en.wikipedia.org/wiki/Basic_access_authentication] provides a quick way to authenticate users of your application without setting up a dedicated "login" page. To get started, attach the auth.basic middleware[/docs/{{version}}/middleware] to your route. The auth.basic middleware is included with the Laravel framework, so you do not need to define it:

Route::get('profile', function() {
    // 認証済みのユーザのみが入れる
})->middleware('auth.basic');

ミドルウェアをルートに指定すれば、ブラウザーからこのルートへアクセスされると自動的に認証が求められます。デフォルトでは、auth.basicミドルウェアはユーザを決める"username"としてユーザのemailカラムを使用します。Once the middleware has been attached to the route, you will automatically be prompted for credentials when accessing the route in your browser. By default, the auth.basic middleware will use the email column on the user record as the "username".

FastCGIの注意A Note On FastCGI

PHP FastCGIを使用している場合、初期状態のままでHTTP基本認証は正しく動作しないでしょう。以下の行を.htaccessファイルへ追加してください。If you are using PHP FastCGI, HTTP Basic authentication may not work correctly out of the box. The following lines should be added to your .htaccess file:

RewriteCond %{HTTP:Authorization} ^(. )$
RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization}]

ステートレスなHTTP基本認証Stateless HTTP Basic Authentication

セッションの識別クッキーを用いずにHTTP基本認証を使用することもできます。これは特にAPI認証に便利です。実装するには、onceBasicメソッドを呼び出すミドルウェアを定義してください。onceBasicメソッドが何もレスポンスを返さなかった場合、リクエストをアプリケーションの先の処理へ通します。You may also use HTTP Basic Authentication without setting a user identifier cookie in the session, which is particularly useful for API authentication. To do so, define a middleware[/docs/{{version}}/middleware] that calls the onceBasic method. If no response is returned by the onceBasic method, the request may be passed further into the application:

<?php

namespace Illuminate\Auth\Middleware;

use Illuminate\Support\Facades\Auth;

class AuthenticateOnceWithBasicAuth
{
    /**
     * 送信されたリクエストの処理
     *
     * @param  \Illuminate\Http\Request  $request
     * @param  \Closure  $next
     * @return mixed
     */
    public function handle($request, $next)
    {
        return Auth::onceBasic() ?: $next($request);
    }

}

次にルートミドルウェアを登録し、ルートに付加します。Next, register the route middleware[/docs/{{version}}/middleware#registering-middleware] and attach it to a route:

Route::get('api/user', function() {
    // 認証済みのユーザのみが入れる
})->middleware('auth.basic.once');

カスタムガードの追加Adding Custom Guards

独自の認証ガードはAuthファサードのextendメソッドを使用し、定義します。サービスプロバイダの中で呼び出します。AuthServiceProviderをLaravelは予め用意しているので、この中にコードを設置できます。You may define your own authentication guards using the extend method on the Auth facade. You should place this call to provider within a service provider[/docs/{{version}}/providers]. Since Laravel already ships with an AuthServiceProvider, we can place the code in that provider:

<?php

namespace App\Providers;

use App\Services\Auth\JwtGuard;
use Illuminate\Support\Facades\Auth;
use Illuminate\Foundation\Support\Providers\AuthServiceProvider as ServiceProvider;

class AuthServiceProvider extends ServiceProvider
{
    /**
     * サービスの初期起動後の登録実行
     *
     * @return void
     */
    public function boot()
    {
        $this->registerPolicies();

        Auth::extend('jwt', function($app, $name, array $config) {
            // Illuminate\Contracts\Auth\Guardのインスタンスを返す

            return new JwtGuard(Auth::createUserProvider($config['provider']));
        });
    }
}

上記の例のように、コールバックをextendメソッドに渡し、Illuminate\Contracts\Auth\Guardの実装を返します。このインスタンスは、カスタムガードで定義が必要ないくつかのメソッドを持っています。カスタムガードが定義できたら、auth.php設定ファイルの、guards設定で使用できます。As you can see in the example above, the callback passed to the extend method should return an implementation of Illuminate\Contracts\Auth\Guard. This interface contains a few methods you will need to implement to define a custom guard. Once your custom guard has been defined, you may use the guard in the guards configuration of your auth.php configuration file:

'guards' => [
    'api' => [
        'driver' => 'jwt',
        'provider' => 'users',
    ],
],

カスタムユーザプロバイダの追加Adding Custom User Providers

ユーザ情報を保管するために伝統的なリレーショナルデータベースを使用したくなければ、Laravelに独自の認証ユーザプロバイダを拡張する必要があります。Authファサードのproviderメソッドを使い、カスタムユーザプロバイダを定義します。If you are not using a traditional relational database to store your users, you will need to extend Laravel with your own authentication user provider. We will use the provider method on the Auth facade to define a custom user provider:

<?php

namespace App\Providers;

use Illuminate\Support\Facades\Auth;
use App\Extensions\RiakUserProvider;
use Illuminate\Support\ServiceProvider;

class AuthServiceProvider extends ServiceProvider
{
    /**
     * サービスの初期起動後の登録実行
     *
     * @return void
     */
    public function boot()
    {
        $this->registerPolicies();

        Auth::provider('riak', function($app, array $config) {
            // Illuminate\Contracts\Auth\UserProviderのインスタンスを返す

            return new RiakUserProvider($app->make('riak.connection'));
        });
    }
}

providerメソッドでプロバイダを登録したら、auth.php設定ファイルで新しいユーザプロバイダへ切り替えます。最初に、新しいドライバを使用するproviderを定義します。After you have registered the provider using the provider method, you may switch to the new user provider in your auth.php configuration file. First, define a provider that uses your new driver:

'providers' => [
    'users' => [
        'driver' => 'riak',
    ],
],

次に、このプロバイダをguards設定項目で利用します。Finally, you may use this provider in your guards configuration:

'guards' => [
    'web' => [
        'driver' => 'session',
        'provider' => 'users',
    ],
],

ユーザプロバイダ契約The User Provider Contract

Illuminate\Contracts\Auth\UserProviderは、MySQLやRiakなどのような持続性のストレージシステムに対するIlluminate\Contracts\Auth\Authenticatableの実装を取得することだけに責任を持っています。これらの2つのインターフェイスはユーザデータがどのように保存されているか、それを表すのがどんなタイプのクラスなのかに関わらず、認証メカニズムを機能し続けるために役立っています。The Illuminate\Contracts\Auth\UserProvider implementations are only responsible for fetching a Illuminate\Contracts\Auth\Authenticatable implementation out of a persistent storage system, such as MySQL, Riak, etc. These two interfaces allow the Laravel authentication mechanisms to continue functioning regardless of how the user data is stored or what type of class is used to represent it.

Illuminate\Contracts\Auth\UserProvider契約を見てみましょう。Let's take a look at the Illuminate\Contracts\Auth\UserProvider contract:

<?php

namespace Illuminate\Contracts\Auth;

interface UserProvider {

    public function retrieveById($identifier);
    public function retrieveByToken($identifier, $token);
    public function updateRememberToken(Authenticatable $user, $token);
    public function retrieveByCredentials(array $credentials);
    public function validateCredentials(Authenticatable $user, array $credentials);

}

retrieveById関数は通常MySQLデータベースの自動増分IDのようなユーザを表すキーを受け付けます。IDにマッチするAuthenticatable実装が取得され、返されます。The retrieveById function typically receives a key representing the user, such as an auto-incrementing ID from a MySQL database. The Authenticatable implementation matching the ID should be retrieved and returned by the method.

retrieveByToken関数は一意の$identifierremember_tokenフィールドに保存されている"remember me" $tokenからユーザを取得します。前のメソッドと同じく、Authenticatable実装が返されます。The retrieveByToken function retrieves a user by their unique $identifier and "remember me" $token, stored in a field remember_token. As with the previous method, the Authenticatable implementation should be returned.

updateRememberTokenメソッドは$userremember_tokenフィールドを新しい$tokenで更新します。新しいトークンは真新しいものでも、「Remember me」ログインに成功した時の値でも、ログアウト時のnull値でも受け付けます。The updateRememberToken method updates the $user field remember_token with the new $token. The new token can be either a fresh token, assigned on a successful "remember me" login attempt, or null when the user is logging out.

retrieveByCredentialsメソッドはアプリケーションへログイン時にAuth::attemptメソッドに指定するのと同じく、ユーザ認証情報の配列を引数に取ります。メソッドは認証情報に一致するユーザを裏の持続ストレージから「クエリ」する必要があります。典型的な使用方法の場合、このメソッドは$credentials['username']の"where"条件でクエリを実行するでしょう。メソッドはAuthenticatableの実装を返します。このメソッドはパスワードバリデーションや認証を行ってはいけませんThe retrieveByCredentials method receives the array of credentials passed to the Auth::attempt method when attempting to sign into an application. The method should then "query" the underlying persistent storage for the user matching those credentials. Typically, this method will run a query with a "where" condition on $credentials['username']. The method should then return an implementation of Authenticatable. This method should not attempt to do any password validation or authentication.

validateCredentialsメソッドは指定された$userとユーザを認証するための$credentialsとを比較します。たとえばこのメソッドは$user->getAuthPassword()の値と$credentials['password']Hash::makeで値を比較します。このメソッドはパスワードが有効であるかを示す、truefalseだけを返します。The validateCredentials method should compare the given $user with the $credentials to authenticate the user. For example, this method should probably use Hash::check to compare the value of $user->getAuthPassword() to the value of $credentials['password']. This method should return true or false indicating on whether the password is valid.

Authenticatable契約The Authenticatable Contract

これでUserProviderの各メソッドが明らかになりました。続いてAuthenticatable契約を見てみましょう。プロバイダはretrieveByIdretrieveByCredentialsメソッドでこのインターフェイスの実装を返していたことを思い出してください。Now that we have explored each of the methods on the UserProvider, let's take a look at the Authenticatable contract. Remember, the provider should return implementations of this interface from the retrieveById and retrieveByCredentials methods:

<?php

namespace Illuminate\Contracts\Auth;

interface Authenticatable {

    public function getAuthIdentifierName();
    public function getAuthIdentifier();
    public function getAuthPassword();
    public function getRememberToken();
    public function setRememberToken($value);
    public function getRememberTokenName();

}

このインターフェイスはシンプルです。getAuthIdentifierNameメソッドは、ユーザの「主キー」フィールドの名前を返します。getAuthIdentifierメソッドはユーザの主キーを返します。MySQLを裏で使用している場合、これは自動増分される主キーでしょう。getAuthPasswordはユーザのハッシュ済みのパスワードを返します。このインターフェイスはどのORMや抽象ストレージ層を使用しているかに関わらず、どんなUserクラスに対しても認証システムが動作するようにしてくれています。デフォルトでLaravelはappディレクトリ中に、このインターフェイスを実装してるUserクラスを持っています。ですから実装例として、このクラスを調べてみてください。This interface is simple. The getAuthIdentifierName method should return the name of the "primary key" field of the user and the getAuthIdentifier method should return the "primary key" of the user. In a MySQL back-end, again, this would be the auto-incrementing primary key. The getAuthPassword should return the user's hashed password. This interface allows the authentication system to work with any User class, regardless of what ORM or storage abstraction layer you are using. By default, Laravel includes a User class in the app directory which implements this interface, so you may consult this class for an implementation example.

イベントEvents

Laravelは認証処理の過程で、様々なイベントを発行します。EventServiceProviderの中で、こうしたイベントに対するリスナを設定できます。:Laravel raises a variety of events[/docs/{{version}}/events] during the authentication process. You may attach listeners to these events in your EventServiceProvider:

/**
 * アプリケーションに指定されたイベントリスナ
 *
 * @var array
 */
protected $listen = [
    'Illuminate\Auth\Events\Registered' => [
        'App\Listeners\LogRegisteredUser',
    ],

    'Illuminate\Auth\Events\Attempting' => [
        'App\Listeners\LogAuthenticationAttempt',
    ],

    'Illuminate\Auth\Events\Registered' => [
        'App\Listeners\LogRegisteredUser',
    ],

    'Illuminate\Auth\Events\Login' => [
        'App\Listeners\LogSuccessfulLogin',
    ],

    'Illuminate\Auth\Events\Logout' => [
        'App\Listeners\LogSuccessfulLogout',
    ],

    'Illuminate\Auth\Events\Lockout' => [
        'App\Listeners\LogLockout',
    ],
];

章選択

開発環境
ビューとテンプレート
公式パッケージ

設定

明暗テーマ
light_mode
dark_mode
brightness_auto システム設定に合わせる
テーマ選択
photo_size_select_actual デフォルト
photo_size_select_actual モノクローム(白黒)
photo_size_select_actual Solarized風
photo_size_select_actual GitHub風(青ベース)
photo_size_select_actual Viva(黄緑ベース)
photo_size_select_actual Happy(紫ベース)
photo_size_select_actual Mint(緑ベース)
コードハイライトテーマ選択

明暗テーマごとに、コードハイライトのテーマを指定できます。

テーマ配色確認
スクリーン表示幅
640px
80%
90%
100%

768px以上の幅があるときのドキュメント部分表示幅です。

インデント
無し
1rem
2rem
3rem
原文確認
原文を全行表示
原文を一行ずつ表示
使用しない

※ 段落末のEボタンへカーソルオンで原文をPopupします。

Diff表示形式
色分けのみで区別
行頭の±で区別
削除線と追記で区別

※ [tl!…]形式の挿入削除行の表示形式です。

Pagination和文
ペジネーション
ペギネーション
ページネーション
ページ付け
Scaffold和文
スカフォールド
スキャフォールド
型枠生成
本文フォント

総称名以外はCSSと同様に、"〜"でエスケープしてください。

コードフォント

総称名以外はCSSと同様に、"〜"でエスケープしてください。

保存内容リセット

localStrageに保存してある設定項目をすべて削除し、デフォルト状態へ戻します。

ヘッダー項目移動

キーボード操作